AT29LV040A-15TU Integrated Circuit Chip 4-megabit (512K x 8) 3-volt Only 256-byte Sector Flash Memory
digital integrated circuits
,linear integrated circuits
4-megabit (512K x 8) 3-volt Only 256-byte Sector Flash Memory AT29LV040A
Features
• Single Voltage, Range 3V to 3.6V Supply
• 3-volt Only Read and Write Operation
• Software Protected Programming
• Fast Read Access Time – 150 ns
• Low Power Dissipation
– 15 mA Active Current
– 50 µA CMOS Standby Current
• Sector Program Operation
– Single Cycle Reprogram (Erase and Program)
– 2048 Sectors (256 Bytes/Sector)
– Internal Address and Data Latches for 256 Bytes
• Two 16K Bytes Boot Blocks with Lockout
• Fast Sector Program Cycle Time – 20 ms Max
• Internal Program Control and Timer
• DATA Polling for End of Program Detection
• Typical Endurance > 10,000 Cycles
• CMOS and TTL Compatible Inputs and Outputs
• Green (Pb/Halide-free) Packaging Option
Description
The AT29LV040A is a 3-volt only in-system Flash Programmable and Erasable Read Only Memory (PEROM). Its 4 megabits of memory is organized as 524,288 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS EEPROM technology, the device offers access times to 150 ns, and a low 54 mW power dissipation. When the device is deselected, the CMOS standby current is less than 50 µA. The device endurance is such that any sector can typically be written to in excess of 10,000 times. The programming algorithm is compatible with other devices in Atmel’s 3-volt only Flash memories.
To allow for simple in-system reprogrammability, the AT29LV040A does not require high input voltages for programming. Three-volt-only commands determine the operation of the device. Reading data out of the device is similar to reading from an EPROM. Reprogramming the AT29LV040A is performed on a sector basis; 256 bytes of data are loaded into the device and then simultaneously programmed.
During a reprogram cycle, the address locations and 256 bytes of data are captured at microprocessor speed and internally latched, freeing the address and data bus for other operations. Following the initiation of a program cycle, the device will automatically erase the sector and then program the latched data using an internal control timer. The end of a program cycle can be detected by DATA polling of I/O7. Once the end of a program cycle has been detected, a new access for a read or program can begin.
Absolute Maximum Ratings*
Temperature Under Bias............................... -55° C to +125° C
Storage Temperature .................................... -65° C to +150° C
All Input Voltages (Including NC Pins)
with Respect to Ground ...................................-0.6V to +6.25V
All Output Voltages
with Respect to Ground .............................-0.6V to VCC + 0.6V
Voltage on A9 (Including NC Pins)
with Respect to Ground ...................................-0.6V to +13.5V
*NOTICE: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
32-lead PLCC Top View 32-lead TSOP (Type 1) Top View
Block Diagram
Stock Offer (Hot Sell)
Part NO. | Q'ty | MFG | D/C | Package |
L78L12A | 10000 | ST | 15+ | SOT89 |
BTA40-700B | 3158 | ST | 14+ | RD-91 |
NCT3521U | 14400 | NUVOTON | 16+ | SOT23-6 |
MBR3045CT | 16459 | VISHAY | 16+ | TO-220 |
AY80609007293AA | 100 | INTEL | 10+ | BGA |
BTA10-600B | 10000 | ST | 16+ | TO-220 |
MT46H32M16LFBF-6IT:C | 7100 | MICRON | 14+ | BGA |
ATTINY85-20SU | 1000 | ATMEL | 14+ | SOP-8 |
MUR3020WTG | 7681 | ON | 14+ | TO-247 |
MT29F4G08ABADAWP:D | 6981 | MICRON | 15+ | TSSOP |
MXD2020EL | 3360 | MEMSIC | 15+ | LCC8 |
MCP1824T-1202E/OT | 5128 | MICROCHIP | 16+ | SOT-23 |
P0751.223NLT | 8520 | PULSE | 16+ | SMD |
NBB-310-T1 | 6400 | RFMD | 16+ | SMT |
NJM3414AV-TE1 | 10000 | JRC | 16+ | TSSOP |
MC908AP32CFBE | 4420 | FREESCALE | 10+ | QFP-44 |
P80C32SBPN | 9720 | PHILIPS | 13+ | DIP |
MAX3232CPWR | 11050 | TI | 14+ | TSSOP |
MC14093BCPG | 6162 | ON | 16+ | DIP |
LMV774MTX | 4258 | NSC | 14+ | TSSOP-14 |
MAX3232IPWR | 11750 | TI | 16+ | TSSOP |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
||
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
||
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
||
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
||
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
||
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
||
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|